Diesel Injector Fuel Injector 0445120177 Bosch for Dodge Komatsu Cummins Isb Qsb 4.5 / 6.7

Injector "hitting the bottle" cleaning
   Its working principle, in simple terms, is to replace the role of the fuel tank, and the fuel cleaner replaces the role of fuel. "Handling bottle" is to use fuel cleaning agent to run the engine, clean the carbon deposits in the fuel injector during operation, and discharge the carbon deposits and sundries through the exhaust pipe to achieve the cleaning effect
   The main function of the fuel system cleaning agent is to dissolve colloids, carbon deposits and other deposits during the movement, so that the fuel injector can maintain the best spray quality, and form a protective layer on the surface of the parts to prolong the service life of the fuel injector and other parts. It should be noted that if the fuel system has not been cleaned for a long time, it is necessary to mix the cleaning agent with gasoline at a ratio of 1:1 and then pour it into the "hanging bottle" to prolong the cleaning time and enhance the cleaning effect. Before connecting to the "bottle", the fuel system needs to be depressurized, and then the fuel line should be disassembled.
   Before cleaning, connect the oil pressure control device to the "hanging bottle", open the lower valve, start the engine, adjust the pressure to 60~80kg/cm2, and let the engine idle for about 15~20 minutes. After cleaning, release the pressure of the "hanging bottle", dismantle the equipment, reinstall the vehicle, put it in neutral, step on the accelerator to maintain the speed at 2000r/min, and continue for a few minutes or drive at a high speed on an open road for a few minutes. The cleaning agent achieves sufficient cleaning effect, and the cleaned sundries are discharged through the exhaust pipe.