Fast Delivery Repair Kit F00VC99002 Diesel Common Rail Injector Gaskets Kit Seals Kit Auto Parts Accessories

1. Correct start and preheating:

When a diesel vehicle is cold started, it should be preheated first, so that the temperature rises to above 40°C before starting.
After starting, run at idle speed for 3 to 5 minutes, and slowly step on the accelerator to speed up and heat up to reduce wear on engine components.
Wait until the coolant temperature rises to above 50°C and the brake pressure reaches 400 kPa (about 4 kg/cm2) before starting.
The engine temperature should be kept at 80-90°C during driving.

2. Smooth start and throttle control:

Start in first gear and step on the accelerator slowly to avoid fuel consumption and black smoke from vehicle exhaust caused by starting with a large throttle.
During normal driving, you should also add fuel slowly to speed up the vehicle evenly and reduce acceleration resistance to reduce fuel consumption.
When releasing the accelerator pedal, be gentle, especially when the vehicle speed is low, to avoid vehicle recoil and increased driving resistance.

3. Optimize driving speed:

On a good straight road, without vehicle congestion, and on the premise of ensuring safety, use medium speed.
Reasonable gliding, but for electronic buses such as National III engines and automatic transmissions, neutral gliding is strictly prohibited. You can use "gear gliding" to save fuel.

4. Reasonable use of brakes:

Under the premise of ensuring safety, try not to use or use less brakes, adopt predictive braking, that is, release the accelerator pedal in advance, use gliding to decelerate, reduce the use of brakes to decelerate, and achieve the fuel saving purpose of "sliding instead of braking".

5. Timely shifting:

Reduce the engine idling time, reduce unnecessary power loss, avoid low-speed gear rush and high-speed gear hard support.
Follow the regulations of each gear speed, such as first gear: 10km/h, second gear: 20 km/h, third gear: 30km/h, fourth gear: 45km/h, fifth gear: 60km/h.

6. Maintenance and care:

Regularly maintain the diesel generator set to reduce abnormal wear and ensure that the engine is in the best condition.
Keep the machine oil-free, check and repair the oil pipe joints and gaskets, and add a diesel recovery device.

7. Increase the cooling water temperature:

Increase the cooling water temperature of the diesel generator set to increase the temperature of the generator set body, promote the complete combustion of diesel, and achieve fuel saving effect.