C-AT Injector
-
New High Quality Diesel Injector 250-1313 10R-9617 373-4087 376-0509 379-0509 386-1752 20R-1264 For CAT C3500B
The Injector C3500B has a high pressure, which can atomize the fuel into a fine atomization (such as modern common rail systems can reach more than 200MPa), improving combustion efficiency.
-
New High Quality Diesel Injector 387-9430 387-9441 557-7627 20R-9079 20R-8066 For CAT C7
The injector C7 can mix the fuel and air in a suitable ratio, ensuring that the engine can obtain the best mixed gas concentration under various working conditions.
-
New High Quality Diesel Injector 211-3027 10R-0959 229-5919 10R-0959 234-1400 10R-1000 For CAT C15
The Injector C15 can evenly distribute the fuel in the combustion chamber, avoid the concentration of fuel in a local area, and ensure that the concentration of the mixed gas in the combustion chamber is uniform.
-
New High Quality Diesel Injector 326-4700 326-4740 326-4756 282-0490 292-3780 306-9380 For CAT C4.2 C6.4 C4.4 C6.6
The Injector C4.2 can use the precise structure inside the injector nozzle (such as multi-hole nozzle, pintle nozzle) to break the high-pressure fuel (the pressure of modern common rail system can reach 160~250MPa) into micron-sized oil mist particles (particle size is usually 5~20μm), increase the contact area between fuel and air, and accelerate mixing and combustion.
-
New High Quality Diesel Injector 20R-8060 20R-8061 20R-8427 20R-8968 20R-8064 For CAT C9
The injector C9 can ensure that a large amount of sensor data can be processed in real time and the control parameters of the injector can be calculated quickly and accurately.
-
New High Quality Diesel Injector 374-0751 30R-0004 618-0751 30R-0004 20R-2285 For CAT C27
The Injector C27 can achieve more efficient combustion control, reducing energy loss and emission generation during the combustion process.
-
New High Quality Diesel Injector 212-3463 10R-0963 10R-9235 212-3466 10R-0968For CAT C12
The injector C12 uses needle valve front end abrasion technology or laser drilling technology to form a fine cone-shaped mist flow when the fuel is sprayed out.
-
New High Quality Diesel Injector 386-1753 20R-1265 386-1754 20R-1266 386-1758 20R-1270 386-1760 20R-1272 For CAT C3500B
The Injector C3500B can precisely control the start and duration of injection, affecting combustion phase and emissions (such as pre-injection, main injection, and post-injection segmented control)
-
New High Quality Diesel Injector 236-0957 242-0857 245-3516 254-4339 254-4340 For CAT C9
The injector C9 can spray fuel into the combustion chamber at the right time to ensure that the fuel starts to burn just when the piston reaches the top dead center.
-
New High Quality Diesel Injector 235-1401 239-4909 244-7716 249-0709 10R-1273 10R-9236 For CAT C15
The Injector C15 can evenly distribute the fuel in the combustion chamber, avoid the concentration of fuel in a local area, and ensure that the concentration of the mixed gas in the combustion chamber is uniform.
-
New High Quality Diesel Injector 4W7017 4W7018 4W7019 8N7005 7W7026 7W7045 170-5181 For CAT
The Injector 8N7005 can control the electromagnetic coil to be energized through the ECU (engine control unit), attracting the needle valve to open, and the fuel is sprayed out under pressure; when the power is off, the spring returns to close the needle valve.
-
New High Quality Diesel Injector 573-4231 573-4235 10R-2828 20R-1259 10R-7221 For CAT C9
The injector C9 is to spray precisely measured fuel in the form of mist into the intake manifold or combustion chamber according to the instructions of the engine control unit (ECU), and mix it with the air to form a combustible mixture.
